U.S. flag An official website of the United States government

On Oct. 1, 2024, the FDA began implementing a reorganization impacting many parts of the agency. We are in the process of updating FDA.gov content to reflect these changes.

  1. Home
  2. Medical Devices
  3. Medical Devices News and Events
  4. Medical Device Sterilization Town Hall: Premarket Submission Expectations and Additional Considerations for Sterility Review - 02/07/2024
  1. Medical Devices News and Events

Town Hall | Virtual

Event Title
Medical Device Sterilization Town Hall: Premarket Submission Expectations and Additional Considerations for Sterility Review
February 7, 2024

Date:
February 7, 2024
Time:
3:00 PM - 4:00 PM ET

On This Page:

Summary

On February 7, 2024, the FDA held the third in a series of medical device sterilization town halls to:

  • Understand FDA expectations for initial premarket submissions based on the 510(k) Sterility Guidance, including recent guidance changes, sterilization modality categories, and what to include in a submission. 
  • Understand additional device and submission considerations for sterility that impact FDA review.

Background

Sterilization is a critical step in the manufacturing process for certain medical devices. Sterilization of medical devices helps prevent serious infections. Inadequate sterilization can lead to life-threatening infections. 

Medical devices are sterilized in a variety of ways including using moist heat (steam), dry heat, radiation, ethylene oxide (EtO) gas, vaporized hydrogen peroxide, and other sterilization methods (for example, chlorine dioxide gas, vaporized peracetic acid, and nitrogen dioxide).

Ethylene oxide is the most commonly used method to sterilize medical devices in the United States, and it is widely used by medical device manufacturers and contract sterilizers worldwide. Other existing sterilization modalities cannot currently replace the use of EtO for many devices. While some novel technologies hold promise, innovative alternative sterilization methods are still in early phases of research and development.

The FDA is committed to reducing reliance on EtO sterilization use while ensuring the integrity of the supply chain so that patients and providers have continued access to the sterile devices they need. To meet this goal, FDA continues to take a multipronged approach, including regulatory flexibilities, supply chain analysis and mitigation, collaboration, innovation, and communication, including this regular series of town halls.

Learn more about sterilization of medical devices.  

Town Hall Materials

The presentation, printable slides and transcript are available on CDRH Learn under "Specialty Technical Topics," sub-section "Sterility.” 

For comments or questions related to this town hall or this series, please email us at MedicalDeviceSterilization@fda.hhs.gov

If you have general questions about this town hall or this series, please contact CDRH's Division of Industry and Consumer Education (DICE) at dice@fda.hhs.gov, 1-800-638-2041, or 301-796-7100.

Previous Medical Device Sterilization Town Halls

Watch previous town halls and access related materials on CDRH Learn under "Specialty Technical Topics," sub-section "Sterility.” 

Future Medical Device Sterilization Town Halls

  • February 29, 2024, 1-2 pm ET. Tentative topics: FDA Modifications (Mods) Guidances and the use of Master Files in Review
  • March 21, 2024, 12-1 pm ET. Tentative topics: Using Standards in Premarket Submissions and the FDA Standards Program

For a complete list of previous and future sterilization town hall event information, visit Medical Device Sterilization Town Hall Series

Back to Top