U.S. flag An official website of the United States government

On Oct. 1, 2024, the FDA began implementing a reorganization impacting many parts of the agency. We are in the process of updating FDA.gov content to reflect these changes.

  1. Home
  2. Inspections, Compliance, Enforcement, and Criminal Investigations
  3. Compliance Actions and Activities
  4. Warning Letters
  5. Beacon Prescriptions - 525833 - 06/01/2017
  1. Warning Letters

WARNING LETTER

Beacon Prescriptions MARCS-CMS 525833 —


Recipient:
Beacon Prescriptions

United States

Issuing Office:
New Jersey District Office

United States


 

  

Black HHS-Blue FDA Logo

 

 

 
New Jersey District
10 Waterview Blvd. 3rd Floor
Parsippany, New Jersey 07054 

 

WARNING LETTER
CMS # 525833
June 1, 2017
 
 
UNITED PARCEL SERVICE
OVERNIGHT DELIVERY
 
Ms. Annik Chamberlin and Ms. Ashley Colasanto
Owners
DCA, Inc. dba Beacon Prescriptions
609 N. Main Street
Southington, CT 06489-2529
 
Dear Ms. Annik Chamberlin and Ms. Ashley Colasanto:
 
From October 12, 2016, to October 25, 2016, U.S. Food and Drug Administration (FDA) investigators inspected your facility, DCA, Inc., dba Beacon Prescriptions, located at 609 N. Main Street, Southington, CT 06489-2529. During the inspection, the investigators noted that drug products you produced failed to meet the conditions of section 503A of the Federal Food, Drug, and Cosmetic Act (FDCA) [21 U.S.C. § 353a] for exemption from certain provisions of the FDCA.  The investigators also noted serious deficiencies in your practices for producing non-sterile drug products, which put patients at risk.  
 
FDA issued a Form FDA 483 to your firm on October 25, 2016. FDA acknowledges receipt of your facility’s response, dated November 16, 2016.  We also acknowledge that you ceased sterile operations in June 2016. Based on this inspection, it appears that you produced drug products that violate the FDCA.
 
A.    Compounded Drug Products Under the FDCA
 
Section 503A of the FDCA describes the conditions under which human drug products compounded by a licensed pharmacist in a State licensed pharmacy or a Federal facility, or a licensed physician, qualify for exemptions from three sections of the FDCA: compliance with current good manufacturing practices (CGMP) (section 501(a)(2)(B)); labeling with adequate directions for use (section 502(f)(1)); and FDA approval prior to marketing (section 505) [21 U.S.C. §§ 351(a)(2)(B), 352(f)(1) and 355(a)].[1]  Receipt of valid prescriptions for individually-identified patients is one of the conditions for the exemptions under section 503A. 
 
B.     Failure to Meet the Conditions of Section 503A
 
During the inspection, the FDA investigators noted that drug products produced by your firm failed to meet the conditions of section 503A. For example, the investigators noted your firm did not receive valid prescriptions for individually-identified patients for a portion of the drug products you produced.
 
Therefore, you compounded drug products that do not meet the conditions of section 503A and are not eligible for the exemptions in that section from the FDA approval requirement of section 505 of the FDCA, the requirement under section 502(f)(1) of the FDCA that labeling bear adequate directions for use, and the requirement of compliance with CGMP under section 501(a)(2)(B) of the FDCA. In the remainder of this letter, we refer to your drug products that do not qualify for exemptions under section 503A as the “ineligible drug products.”
 
Specific violations are described below.        
 
C.    Violations of the FDCA
 
Adulterated Drug Products
 
The FDA investigators noted that drug products were prepared, packed, or held under insanitary conditions, whereby they may have become contaminated with filth or rendered injurious to health, causing your drug products to be adulterated under section 501(a)(2)(A) of the FDCA. Our investigators observed your firm handling hazardous or highly potent drugs (e.g., hormones, teratogenic materials) without providing adequate containment, segregation, and cleaning of work surfaces, utensils, and personnel to prevent cross-contamination.
 
Furthermore, the manufacture of the ineligible drug products is subject to FDA’s CGMP regulations, Title 21, Code of Federal Regulations (CFR), parts 210 and 211. The FDA investigators observed significant CGMP violations at your facility, causing the ineligible drug products to be adulterated within the meaning of section 501(a)(2)(B) of the FDCA. The violations included, for example:
 
1.      Your firm failed to clean, maintain, and, as appropriate for the nature of the drug, sanitize and/or sterilize equipment and utensils at appropriate intervals to prevent malfunctions or contamination that would alter the safety, identity, strength, quality, or purity of the drug product beyond the official or other established requirements (21 CFR 211.67(a)).
 
2.      Your firm failed to adequately design the facility with adequate separation or defined areas or such other control systems necessary to prevent contamination or mix-ups (21 CFR 211.42(b)).
 
3.      Your firm failed to routinely calibrate, inspect, or check according to a written program designed to assure proper performance and to maintain written records of calibration checks and inspection of automatic, mechanical, or electronic equipment, including computers, used in the manufacture, processing, packing, and holding of a drug product (21 CFR 211.68(a)).
 
4.      Your firm does not have, for each batch of drug product, appropriate laboratory determination of satisfactory conformance to final specifications for the drug product, including the identity and strength of each active ingredient, prior to release (21 CFR 211.165(a)).
 
It is a prohibited act under section 301(k) of the FDCA [21 U.S.C. § 331(k)] to do any act with respect to a drug, if such act is done while the drug is held for sale after shipment in interstate commerce and results in the drug being adulterated.
 
Misbranded Drug Products
 
The ineligible drug products you compounded are intended for conditions not amenable to self-diagnosis and treatment by individuals who are not medical practitioners; therefore, adequate directions for use cannot be written so that a layman can use these products safely for their intended uses. Consequently, their labeling fails to bear adequate directions for their intended uses.[2]  Accordingly, these ineligible drug products are misbranded under section 502(f)(1) of the FDCA.  It is a prohibited act under section 301(k) of the FDCA to do any act with respect to a drug, if such act is done while the drug is held for sale after shipment in interstate commerce and results in the drug being misbranded.
 
D.    Corrective Actions
 
We have reviewed your firm’s responses to the Form FDA 483. We acknowledge that you ceased sterile operations in June 2016.   
 
Regarding the insanitary condition observations in the Form FDA 483, we are unable to fully evaluate one of your corrective actions due to lack of adequate supporting documentation. Specifically, you stated that your firm contacted a vendor of cleaning products specific for laboratory and healthcare applications, but your response did not indicate which cleaning agents your firm intends to use from this vendor and the adequacy of such cleaning agents to reduce cross-contamination.
 
Please be aware that section 501(a)(2)(A) of the FDCA concerning insanitary conditions applies regardless of whether drug products you compound meet the conditions of section 503A, including the condition on receipt of a prescription for an identified individual patient prior to compounding and distributing drug products. 
 
In addition, regarding issues related to the conditions of section 503A of the FDCA, your corrective actions appear adequate. You stated that “Beacon Prescriptions immediately ceased preparing non-patient specific compounds on October 25, 2016.”
 
Should you continue to compound and distribute drug products that do not meet the conditions of section 503A, the compounding and distribution of such drugs would be subject to the new drug approval requirement, the requirement to label drug products with adequate directions for use, and the drug CGMP regulations. Before doing so, you must comply with the requirements of section 505 and 502(f)(1) and fully implement corrections that meet the minimum requirements of the CGMP regulations.[3] 
 
In addition to the issues discussed above, you should note that CGMP requires the implementation of quality oversight and controls over the manufacture of drugs, including the safety of raw materials, materials used in drug manufacturing, and finished drug products. See section 501 of the FDCA.  If you choose to contract with a laboratory to perform some functions required by CGMP, it is essential that you select a qualified contractor and that you maintain sufficient oversight of the contractor’s operations to ensure that it is fully CGMP compliant.  Regardless of whether you rely on a contract facility, you are responsible for assuring that drugs you introduce into interstate commerce are neither adulterated nor misbranded.  [See 21 CFR 210.1(b), 21 CFR 200.10(b)].
 
 
E.     Conclusion
 
The violations cited in this letter are not intended to be an all-inclusive statement of violations at your facility. You are responsible for investigating and determining the causes of the violations identified above and for preventing their recurrence or the occurrence of other violations. It is your responsibility to ensure that your firm complies with all requirements of federal law, including FDA regulations.
 
You should take prompt action to correct the violations cited in this letter. Failure to promptly correct these violations may result in legal action without further notice, including, without limitation, seizure and injunction. 
 
Within fifteen (15) working days of receipt of this letter, please notify this office in writing of the specific steps that you have taken to correct violations. Please include an explanation of each step being taken to prevent the recurrence of violations, as well as copies of related documentation. If you do not believe that the products discussed above are in violation of the FDCA, include your reasoning and any supporting information for our consideration. If you cannot complete corrective action within 15 working days, state the reason for the delay and the time within which you will complete the correction.
 
Your written notification should refer to the Warning Letter Number above (CMS # 525833). Please address your reply to:
 
Maya M. Davis, Compliance Officer
Waterview Corporate Center
10 Waterview Blvd. 3rd Floor
Parsippany, New Jersey 07054
 
If you have questions regarding the contents of this letter, please contact Ms. Davis at (860) 240-4289 ex. 25 or Maya.Davis@fda.hhs.gov.
 
 
Sincerely,
/S/
Diana Amador Toro
District Director                                  
New Jersey District


[1] We remind you that there are conditions other than those discussed in this letter that must be satisfied to qualify for the exemptions in section 503A of the FDCA.
[2] Your ineligible drug products are not exempted from the requirements of section 502(f)(1) of the FDCA by regulations issued by the FDA (see, e.g., 21 CFR 201.115).
[3] In this letter we do not address whether your proposed corrective actions would resolve the CGMP violations noted above.

 

Back to Top