1. Home
  2. Medical Devices
  3. Medical Device Safety
  4. Medical Device Recalls and Early Alerts
  5. Thoracic Stent Graft Recall: Bolton Medical Removes Relay Pro System
  1. Medical Device Recalls and Early Alerts

Thoracic Stent Graft Recall: Bolton Medical Removes Relay Pro System

The affected products and recommendations for what to do with the devices below have not changed. This recall involves removing certain devices from where they are used or sold. The FDA has identified this recall as the most serious type. This device may cause serious injury or death if you continue to use it.

Affected Product

The FDA is aware that Bolton Medical has issued an Urgent Medical Device Recall (Correction) notice providing updated use instructions for all Relay Pro Thoracic Stent Graft System, N4: Non-Bare Stent Configuration 32mm and above. The notice also recommends customers consider using alternative stent-graft options prior to use of impacted RelayPro devices until mitigation measures are in place.

What to Do

Consider alternative stent graft options prior to use of impacted RelayPro devices. Review the existing bailout methods included in the instructions for use prior to using the affected devices.

On April 23, Bolton Medical sent all affected customers a letter recommending the following actions:

  • Consider use of alternative stent-graft options prior to use of impacted RelayPro devices until mitigation measures are in place. 
  • In the event that there is difficulty releasing the proximal stent and no resistance is encountered when sliding the apex holder back, the user should first attempt the existing bailout techniques described in the Instructions for Use (IFU) prior to committing to any alternative course of action.  If the problem persists, there are no additional device bailout methods available and clinical judgment should guide timely decision-making, including consideration of conversion to open surgery.
  • Inform all users of Relay Pro of the additional guidance for managing cases where the stent graft cannot be released from the delivery system. If devices have been transferred to another facility, please provide them with a copy of the notification and instruct them to follow the actions in this section.
  • Keep a copy of the Urgent Medical Device Recall (Correction) notice with the IFU and post a copy where devices are stored.

Reason for Recall

Bolton Medical stated that in some cases the graft is unable to unclasp from the delivery system because the proximal clasp is disconnected from the outer control tube. This may be recognized by the user as a lack of resistance felt when sliding the apex holder back accompanied by a failure to release the proximal stent. The implant cannot be recaptured at this stage in the procedure. This failure mode is not able to be recognized until it occurs during the procedure.

Difficulties in releasing the stent graft may result in delay of procedure, stent graft displacement, and an inability to release the stent graft. This may require conversion to open surgical repair to release the clasp and can result in patient death. Please be advised that this failure mode can occur without prior warning and no device-based bailout method has been identified for this specific scenario.

As of April 23, Bolton Medical has reported three deaths associated with this issue, including one aortic perforation and two conversions to open surgery which resulted in patient deaths due to stroke.

Device Use

The RelayPro Thoracic Stent-Graft System is a minimally invasive device used to repair damaged or weakened sections of the thoracic aorta (e.g., aneurysms, dissections, or tears) by placing a stent graft that reinforces the vessel and maintains blood flow.

Contact Information

Customers in the U.S. with adverse reactions, quality problems, or questions about this recall should contact Terumo Aortic at Market_Actions-TMC@terumomedical.com.

Additional FDA Resources

  1. FDA Enforcement Report 
  2. CDRH Medical Device Recall Database

How do I report a problem?

Health care professionals and consumers may report adverse reactions or quality problems they experienced using these devices to MedWatch: The FDA Safety Information and Adverse Event Reporting Program.

Timeline of Communication Updates 

DateActions
05/20/2026The FDA updated this communication to inform the public that this issue has been classified as a Class I Recall.
04/28/2026The FDA issued an Early Alert communication to notify the public of a potentially high-risk device issue.

Subscribe to Medical Device Safety and Recalls 

Sign up to receive email updates on medical device recalls, safety communications, and other safety information.  
Back to Top