U.S. flag An official website of the United States government
  1. Home
  2. Tobacco Products
  3. Products, Guidance & Regulations
  4. Rules, Regulations and Guidance
  5. Section 915 of the Federal Food, Drug, and Cosmetic Act - Regulation Requirement
  1. Rules, Regulations and Guidance

Section 915 of the Federal Food, Drug, and Cosmetic Act - Regulation Requirement

Return to Tobacco Control Act Main Page


On this page:


Related Resources for Section 915

Final Guidance


  1. Testing, Reporting, and Disclosure. Not later than 36 months after the date of enactment of the Family Smoking Prevention and Tobacco Control Act, the Secretary shall promulgate regulations under this Act that meet the requirements of subsection (b).  
  2. Contents of Rules. The regulations promulgated under subsection (a)
    1. shall require testing and reporting of tobacco product constituents, ingredients, and additives, including smoke constituents, by brand and subbrand that the Secretary determines should be tested to protect the public health, provided that, for purposes of the testing requirements of this paragraph, tobacco products manufactured and sold by a single tobacco product manufacturer that are identical in all respects except the labels, packaging design, logo, trade dress, trademark, brand name, or any combination thereof, shall be considered as a single brand; and  
    2. may require that tobacco product manufacturers, packagers, or importers make disclosures relating to the results of the testing of tar and nicotine through labels or advertising or other appropriate means, and make disclosures regarding the results of the testing of other constituents, including smoke constituents, ingredients, or additives, that the Secretary determines should be disclosed to the public to protect the public health and will not mislead consumers about the risk of tobacco-related disease.  
  3. Authority. The Secretary shall have the authority under this chapter to conduct or to require the testing, reporting, or disclosure of tobacco product constituents, including smoke constituents.  
  4. Small Tobacco Product Manufacturers
    1. First Compliance Date. The initial regulations promulgated under subsection (a) shall not impose requirements on small tobacco product manufacturers before the later of
      1. the end of the 2-year period following the final promulgation of such regulations; and  
      2. the initial date set by the Secretary for compliance with such regulations by manufacturers that are not small tobacco product manufacturers.  
    2. Testing and Reporting Initial Compliance Period
      1. 4-year Period. The initial regulations promulgated under subsection (a) shall give each small tobacco product manufacturer a 4-year period over which to conduct testing and reporting for all of its tobacco products. Subject to paragraph (1), the end of the first year of such 4-year period shall coincide with the initial date of compliance under this section set by the Secretary with respect to manufacturers that are not small tobacco product manufacturers or the end of the 2-year period following the final promulgation of such regulations, as described in paragraph (1)(A). A small tobacco product manufacturer shall be required
        1. to conduct such testing and reporting for 25 percent of its tobacco products during each year of such 4-year period; and  
        2. to conduct such testing and reporting for its largest-selling tobacco products (as determined by the Secretary) before its other tobacco products, or in such other order of priority as determined by the Secretary.  
      2. Case-by-Case Delay. Notwithstanding subparagraph (A), the Secretary may, on a case-by-case basis, delay the date by which an individual small tobacco product manufacturer must conduct testing and reporting for its tobacco products under this section based upon a showing of undue hardship to such manufacturer. Notwithstanding the preceding sentence, the Secretary shall not extend the deadline for a small tobacco product manufacturer to conduct testing and reporting for all of its tobacco products beyond a total of 5 years after the initial date of compliance under this section set by the Secretary with respect to manufacturers that are not small tobacco product manufacturers.  
    3. Subsequent and Additional Testing and Reporting. The regulations promulgated under subsection (a) shall provide that, with respect to any subsequent or additional testing and reporting of tobacco products required under this section, such testing and reporting by a small tobacco product manufacturer shall be conducted in accordance with the timeframes described in paragraph (2)(A), except that, in the case of a new product, or if there has been a modification described in section 910(a)(1)(B) of any product of a small tobacco product manufacturer since the last testing and reporting required under this section, the Secretary shall require that any subsequent or additional testing and reporting be conducted in accordance with the same timeframe applicable to manufacturers that are not small tobacco product manufacturers.  
    4. Joint Laboratory Testing Services. The Secretary shall allow any 2 or more small tobacco product manufacturers to join together to purchase laboratory testing services required by this section on a group basis in order to ensure that such manufacturers receive access to, and fair pricing of, such testing services.  
  5. Extensions for Limited Laboratory Capacity
    1. In General. The regulations promulgated under subsection (a) shall provide that a small tobacco product manufacturer shall not be considered to be in violation of this section before the deadline applicable under paragraphs (3) and (4), if
      1. the tobacco products of such manufacturer are in compliance with all other requirements of this chapter; and  
      2. the conditions described in paragraph (2) are met.  
    2. Conditions. Notwithstanding the requirements of this section, the Secretary may delay the date by which a small tobacco product manufacturer must be in compliance with the testing and reporting required by this section until such time as the testing is reported if, not later than 90 days before the deadline for reporting in accordance with this section, a small tobacco product manufacturer provides evidence to the Secretary demonstrating that
      1. the manufacturer has submitted the required products for testing to a laboratory and has done so sufficiently in advance of the deadline to create a reasonable expectation of completion by the deadline;  
      2. the products currently are awaiting testing by the laboratory; and  
      3. neither that laboratory nor any other laboratory is able to complete testing by the deadline at customary, nonexpedited testing fees.  
    3. Extension. The Secretary, taking into account the laboratory testing capacity that is available to tobacco product manufacturers, shall review and verify the evidence submitted by a small tobacco product manufacturer in accordance with paragraph (2). If the Secretary finds that the conditions described in such paragraph are met, the Secretary shall notify the small tobacco product manufacturer that the manufacturer shall not be considered to be in violation of the testing and reporting requirements of this section until the testing is reported or until 1 year after the reporting deadline has passed, whichever occurs sooner. If, however, the Secretary has not made a finding before the reporting deadline, the manufacturer shall not be considered to be in violation of such requirements until the Secretary finds that the conditions described in paragraph (2) have not been met, or until 1 year after the reporting deadline, whichever occurs sooner.  
    4. Additional Extension. In addition to the time that may be provided under paragraph (3), the Secretary may provide further extensions of time, in increments of no more than 1 year, for required testing and reporting to occur if the Secretary determines, based on evidence properly and timely submitted by a small tobacco product manufacturer in accordance with paragraph (2), that a lack of available laboratory capacity prevents the manufacturer from completing the required testing during the period described in paragraph (3).  
  6. Rule of Construction. Nothing in subsection (d) or (e) shall be construed to authorize the extension of any deadline, or to otherwise affect any timeframe, under any provision of this Act or the Family Smoking Prevention and Tobacco Control Act other than this section.
 
Back to Top