Radiation-Emitting Products

STEP Reference Number and Discussing Specific STEP Test Result Values with the Facility

Policy Guidance Help System logo

When performing the STEP test, it is critical that you identify the current Reference Step Number. You may set the current value to display on your laptop screen automatically. To do this, simply go into the Equipment Registration Screen and enter the value as the default value for the Reference Step Number. This will insure that the correct reference step number will automatically be entered into each STEP test screen from then on.

FYI for the future: When a new box of control film is issued, the Reference Step Number may change.


Page Last Updated: 08/11/2014
Note: If you need help accessing information in different file formats, see Instructions for Downloading Viewers and Players.
Language Assistance Available: Español | 繁體中文 | Tiếng Việt | 한국어 | Tagalog | Русский | العربية | Kreyòl Ayisyen | Français | Polski | Português | Italiano | Deutsch | 日本語 | فارسی | English