M-b-366: Dairymaster USA, Inc. AquaJetz With Cover, Model JT 300

<< Back to Index of Memoranda of Information (M-b) Main Page  

Issuance Date: May 31, 2011

TO: All Regional Food and Drug Directors
Attn: Regional Milk Specialists

FROM: Milk Safety Branch (HFS-626)

SUBJECT: Dairymaster USA, Inc. AquaJetz With Cover, Model JT 300

In accordance with M-I-00-2, Milk and Milk Product Equipment-A Guideline forEvaluating Construction, FDA's Pacific/Southwest Regional Milk Specialists and CFSAN's Dairy and Egg Branch/Milk Safety Team have specifically evaluated the Dairymaster USA, Inc. AquaJetz with cover, model JT 300 and have validated and confirmed the technical information submitted by DairyMaster USA, Inc. and the review findings of the Pacific Southwest Region Dairy Equipment Review Committee (PSRDERC).

When the Dairymaster USA, Inc. AquaJetz with cover, model JT 300 are constructed, installed and maintained in accordance with submitted documents titled PSRDERC Revision No. 4. they have been found to meet the applicable provisions of Item 9r-Utensils and Equipment - Construction of the Grade "A" Pasteurized Milk Ordinance (PMO).

The technical information that was submitted and reviewed addressing the Dairymaster AquaJetz with cover, model JT 300 constitutes the PSRDERC's Engineering Design and Technical Construction File (EDTCF) PR-08-03. The material in the EDTCF is the property of the manufacturer and may be shown at their discretion.

For additional information regarding this equipment, and to request copies of the documents listed, please contact:

Dairymaster USA, Inc.
2120 Tuley Road
Indian Springs, OH 45015
Attn: Mike Piche'
Phone: (513) 942-0868

FDA's review and acceptance of the Dairymaster AquaJetz with cover, model JT 300 does not constitute FDA or State Regulatory Agency endorsement or approval. Any representation on a label or in printed literature citing or indicating as "FDA Approved" would be considered as false and misleading.

An electronic version of this memorandum is available for distribution to Regional Milk Specialists, State Milk Regulatory/Rating Agencies and State Milk Sanitation Rating Officers in your region. The electronic version should be widely distributed to representatives of the dairy industry and other interested parties and will also be available on the FDA Web Site at at a later date.

If you would like an electronic version of this document prior to it being available on the FDA Web Site, please e-mail your request to


Randy Elsberry
FDA Regional Dairy Specialist

CAPT Robert Hennes
FDA/DEB Milk Sanitation Officer


EDTCF Table of Contents

Photo of Model JT 300


AquaJetz Model JT 300

Table of Contents

  1. Purpose
  2. Scope
  3. Responsibility
  4. Materials Compliance
  5. Appendix

    JT208. Top Cover (Drawing Reference A15150 – 1)
    JT209. Bottom Cover (Drawing Reference A15150 – 2)
    JT211. Gasket (Drawing Reference A15200)
    JT104. AquaJetz Cup (Drawing Reference 7913)
    JT205. Overmoulded Nozzle (Drawing Reference 7762)
    JT302. Drain Valve (Drawing Reference A17330)
    JT210. Cover (Drawing Reference A15250)
    JT324. Water Inlet Seal (Drawing Reference 6961)
    P410. Inlet Adaptor (Drawing Reference A13940)

  6. AquaJetz Assembly Revision No. 4 (Drawing Reference 7341)

Dairymaster Aquajetz model JT 300

Page Last Updated: 06/22/2015
Note: If you need help accessing information in different file formats, see Instructions for Downloading Viewers and Players.
Language Assistance Available: Español | 繁體中文 | Tiếng Việt | 한국어 | Tagalog | Русский | العربية | Kreyòl Ayisyen | Français | Polski | Português | Italiano | Deutsch | 日本語 | فارسی | English