[Federal Register: October 3, 2000 (Volume 65, Number 192)]
[Notices]
[Page 59006-59007]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr03oc00-58]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. 00D-1492]
Mutual Recognition Agreement, Medical Device Annex; Confidence
Building Activities: Availability of Draft Guidances
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA) is announcing the
availability of two draft guidance documents entitled ``Implementation
Plan for the Mutual Recognition Agreement Between the European Union
and the United States of America: Confidence Building Programme:
Overview'' and ``Implementation Plan for the Mutual Recognition
Agreement Between the European Union and the United States of America:
Procedures for Joint Confidence Building.'' These draft guidance
documents have been prepared jointly by FDA and the Commission for the
European Communities (CEC's) and are intended to serve as guidance for
all interested parties participating in confidence building activities
under the medical device annex to the Mutual Recognition Agreement
(MRA). While these draft guidance documents reflect the latest European
Union (EU) edits, they have not been accepted by FDA. FDA is requesting
comments on these documents. FDA plans to provide its comments on these
documents and any stakeholder comments the agency receives to the
CEC's.
DATES: Submit written comments on these draft guidance documents to
ensure their adequate consideration in preparation of the final
document by November 2, 2000.
ADDRESSES: Submit written comments concerning these draft guidance
documents to the Dockets Management Branch (HFA-305), Food and Drug
Administration, 5630 Fishers Lane, rm. 1061, Rockville, MD 20852.
Comments should be identified with the docket number found in brackets
in the heading of this document. To expedite the review process, if
possible, FDA requests that you send a copy of your comments to the
contact person, Christine Nelson (address below) or by e-mail to
mcn@cdrh.fda.gov. See the SUPPLEMENTARY INFORMATION section for
information on electronic access to these documents. If you do not have
access to the Internet, submit written requests for single copies on a
3.5" diskette of the draft guidance documents listed above to the
Division of Small Manufacturers Assistance (HFZ-220), Center for
Devices and Radiological Health, Food and Drug Administration, 1350
Piccard Dr., Rockville, MD 20850. Send two self-addressed adhesive
labels to assist that office in processing your requests, or fax your
request to 301-443-8818.
FOR FURTHER INFORMATION CONTACT: Christine Nelson, Office of Health
and Industry Programs (HFZ-220), Center for Devices and Radiological
Health, Food and Drug Administration, 1350 Piccard Dr., Rockville, MD
20850, 301-443-6597, ext. 128, FAX 301-443-8818, or e-mail
mcn@cdrh.fda.gov.
SUPPLEMENTARY INFORMATION:
I. Background
On June 27, 1997, the United States and the EU signed an MRA that
covers a variety of product sectors including telecommunication,
electrical safety, recreational crafts, pharmaceuticals, and medical
devices. The Medical Device Annex to the MRA became effective December
7, 1998, and initiated a 3-year transition period during which both
sides will engage in confidence building activities. Article 7 of the
Medical Device Annex provides that FDA and the CEC's will establish a
joint confidence building program to provide sufficient evidence of the
capabilities of the nominated Conformity Assessment Bodies (CAB's) to
perform quality system or product evaluations to the specifications of
the parties. After the 3-year period, the Medical Device Annex would
become operational if the confidence building activities are
successfully completed.
The Medical Devices Annex covers the exchange of quality systems
evaluation/inspection reports for all medical devices and premarket
evaluations for selected low to medium risk devices. A European CAB can
conduct inspections for all classes of devices and 510(k) evaluations
for selected devices based on FDA requirements for European device
manufacturers who wish to market their devices in the United States.
Similarly, a U.S. CAB can conduct quality system or type-testing
evaluations based on EU requirements for U.S. device manufacturers who
wish to market their devices in the EU. In addition, an alert system
would be set up during the transition period and maintained thereafter,
by which the parties will notify each other when there is an immediate
danger to public health. As part of that system, each party will
[[Page 59007]]
notify the other party of any confirmed problem reports, corrective
actions, or recalls.
These two draft guidance documents entitled ``Implementation Plan
for the Mutual Recognition Agreement Between the European Union and the
United States of America: Confidence Building Programme: Overview'' and
``Implementation Plan for the Mutual Recognition Agreement Between the
European Union and the United States of America: Procedures for Joint
Confidence Building'' provide guidance on how to implement confidence
building activities under the Medical Device Annex of the MRA for
quality system evaluations and product evaluations. Guidance on
implementing an alert system will be issued separately at another time.
II. Significance of Guidance
These draft guidance documents are intended to provide guidance.
The draft guidance documents were developed by FDA and the European
Commission (EC) to further implementation of the MRA. This current
draft represents the EC's latest edits. FDA will be providing comments
to the EC and proposing certain changes that are described in the ``FDA
Concerns'' section of the guidance document. These draft guidance
documents do not create or confer any rights for or on any person and
do not operate to bind FDA or the public. An alternative approach may
be used if such approach satisfies the requirements of the applicable
statute, regulations, or both.
The agency has adopted good guidance practices (GGP's) which set
forth the agency's policies and procedures for the development,
issuance, and use of guidance documents (62 FR 8961, February 27,
1997). These guidance documents are issued as a draft Level 1 guidance
consistent with GGP's.
III. Electronic Access
Persons interested in obtaining copies of these draft guidance
documents may do so through the Internet at http://frwebgate.access.gpo.gov/cgi-bin/leaving.cgi?from=leavingFR.html&log=linklog&to=http://www.fda.gov/cdrh/mra.
IV. Comments
Interested persons may submit to the Dockets Management Branch
(address above) written comments regarding these draft guidance
documents by November 2, 2000. Two copies of any comments are to be
submitted, except that individuals may submit one copy. Comments should
be identified with the docket number found in brackets in the heading
of this document. A copy of the draft guidance documents and received
comments may be seen in the Dockets Management Branch between 9 a.m.
and 4 p.m., Monday through Friday. To expedite receipt and review, FDA
requests, if possible, that a copy of your comments be sent to the
contact person (address above) or by e-mail to mcn@cdrh.fda.gov.
Dated: September 22, 2000.
William K. Hubbard,
Senior Associate, Commissioner for Policy, Planning, and Legislation.
[FR Doc. 00-25351 Filed 10-2-00; 8:45 am]
BILLING CODE 4160-01-F