• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Medical Devices

  • Print
  • Share
  • E-mail

Invitation to Preparers of Abbreviated 510(k)s for Selected Devices

FDA is inviting preparers of Abbreviated 510(k)s for selected devices to develop their Summary Reports interactively with the review division
 

In "The New 510(k) Paradigm - Alternate Approaches to Demonstrating Substantial Equivalence in Premarket Notifications; Final Guidance", FDA presented alternatives to the traditional 510(k) for demonstrating substantial equivalence that would streamline the preparation and review processes for this type of marketing application. In the Abbreviated 510(k) option, manufacturers may rely on guidance documents, special controls, or recognized standards. If you are submitting an Abbreviated 510(k) that relies on a guidance document and/or a special control, you should include a summary report that describes how the guidance and/or special control were used to address the risks associated with the particular device type.

In addition to the above-described use of special controls, the agency recently released special control guidance documents for ingestible gastrointestinal imaging systems, automated differential cell counters, and indwelling blood gas analyzers. In these guidances, the risks associated with the specific device type were identified as well as the agency's recommendations for addressing them. FDA believes that the use of such guidances will help to significantly reduce regulatory burden while still ensuring that the risks associated with the device are adequately addressed.1


1 "Special Controls Guidance Documents to Reduce Regulatory Burden

FDA is inviting preparers of Abbreviated 510(k)s for certain types of devices to develop their summary reports interactively with the review division. As discussed in the guidances listed below, a summary report should contain the information that FDA has described in a special controls guidance document or acceptable alternative information that addresses the identified risks, to support a substantial equivalence determination for these device types.

In addition to the five device types mentioned above for which we have issued final guidances, we are also listing three device types for which we have issued draft special control guidances. The agency is encouraging manufacturers of any of these eight types of devices to participate.

Guidances

Draft guidances

Why should industry participate in this interactive project?

By working interactively with the review division to develop a template for 510(k) summary reports for certain types of devices, industry will be able to provide direct input on the format, thus increasing the likelihood that the manufacturer will be satisfied with the end result. In addition, once FDA describes the appropriate content for specific types of summary reports, industry should be able to reduce its preparation time for Abbreviated 510(k)s for these device types.

What is the benefit of this project to FDA?

FDA will benefit from the technical experience of the manufacturers of these devices to help ensure that the agency identifies adequate and appropriate methods of addressing the risks associated with these products. Industry may be able to provide alternative methods of addressing the risks that the agency had not previously considered or provide advice on the acceptance criteria to apply. FDA should be able to reduce its review time for these summary reports after templates are developed and disseminated among submitters and reviewers.

What should you do if you wish to participate?

Contact Ann Hawthorne at (301) 594-1190 or by e-mail to cxh@cdrh.fda.gov.